Clik here to view.
2D Contouring Lead-in / Lead-out issues
This is with SC8, but I've seen this on 7 as well. I'm hoping someone else can point out something I'm missing here or some slick way around this. It seems that when lead-in / lead-out are turned on,...
View ArticleAxis's creeping away...
I just got the wiring and most of the programming done on my Tree 325 retrofit. (Kflop/Kanalog) After battling with an air pressure interlock (forgot I tied that in...) I got the E-stop loop enabled,...
View ArticleNeed Help! Mori DL151Y - Turret Backlash Adjustment?
Hello All, I have a 1998 DL151Y and there is backlash in the turret rotation that causes it to 'clunk' when indexing. I am trying to determine if there are backlash adjustments for each of the gears in...
View ArticleOkuma Osp7000l Lb15IIM Post Needed.
Hello!, Im looking for a post for an Okuma lB15IIM with Live tooling. Id Be willing to buy this post/trade as I have a small collection of working posts. Thank you in advance, Best Regards.
View ArticleYAG metal laser cutting machine
GWK1325 CNC metal laser cutting machine Compared with other equipments, the advantages are as follows: 1、High precision: applicable for cutting on precision parts, calligraphy and painting. 2、Fast...
View Articlecad/cam package for cnc milling and 3d printing?
I am looking for one cad/cam package that I can use with my cnc mill and can also produce stl files for my 3d printer. I was looing at Dolphin but they say they can't produce stl's. Obviously I am on a...
View ArticleClik here to view.
part template vid
he'ya all, got a txt looking for part template at start-up, sooo I don't do txt's flattering as they are, done it for units and planes but principley it's just whatever you need most commonly, and you...
View ArticleMachining PPS Glass Filled
Has anyone ever machined PPS Glass Filled material on their Vertical Machining Center. I am curious if it becomes an issue with glass particals getting into the coolant. And if there is any specific...
View ArticleNeed new ball screw.... NM 200 Series 1
Well my thrust side bearings took a dump. It was a manufacturer defect in the bearing housing. It was machined too large and the bearing was not a press fit, it literally popped out. So after use ( 2...
View ArticleNeed Help! haas st-10 post surfcam
this is my first post. i need a post for a haas lathe st-10 for surfcam 6 . the ones they have are way off. i dont have any problems with my mills. really need help. thanks
View ArticleSoft Stop and no cutting. What am I doing wrong?
My Nice Cut 1200x900 100w laser with a Leetro MPC6535 and LaserCut 5.3 with an i7 16gb RAM, 2gb graphics card, Windows 7, AutoCad 2011 or 2012, has stopped working and just says "soft stop" every time...
View ArticleClik here to view.
First machine build after 5 year break (pics)
Hello all, I started this machine about 6 years ago and then life hapened! I knew then where I was going with it however after a five years away from it I can't remember a dang thing! I am not sure...
View ArticleTaig Mill questions
Hello, I was watching the videos at TAIG CNC about adjusting the taig mill and it was mentioned using automatic transmission fluid on the slides. My question is if I use the transmission fluid would I...
View ArticleNeed Help! Alarm 201NFB Trip
Hello all Please kindly to give me advises for my machine happened alarm 20NMI and 201 NFB trip As it is in japaness language ,My machine is MAZATROLCAM T2 (1985) Thank a lot
View ArticleNeed Help! endmill set with 6mm shank
Hi all, Can any one point me to set of end mills with 6mm shanks? something like 1mm - 6mm end mill all with 6mm shank. :banana: build done now time to make some dust. I have an old Bosch router with...
View ArticleTHC bounce/oscillation
DynaCNC With Cutmaster 52. Mach3 Torch moves up and down slightly about 3 times a second. Changing tip volts changes the height the bounce happens at. Bounces about 1/16" I'm probably missing a THC...
View ArticleDoes anyone use DevCad?
I have DevCad learning edition and haven't been able to find any tutorials or guides. Even a search here on CNC Zone came up empty. So does anyone have any experience with DevCad? Thanks, Steve
View Article