Max 100 cut speeds
Hi, Ive always struggled to reach the listed cut speeds with my max100, i have tried a number of things to cure it but never really got to the bottom of it, ive changed the main contactor on advice...
View ArticleWANT TO TRY WOOD
Have any of you ez router guys bought the plasma router combo, I did and have not tried the routing yet. I would like to know what all is involved in swithching over. I would like to know what kind of...
View ArticleProblem Fanuc Axis coordination problem
I have an Anderson SUP router and I am experiencing issues with the X-Y axis coordination when I cut circles. I have checked backlash on both X&Y and both are 0. Anderson told me it is most likely...
View ArticleWondering Kuka 6 axis retrofit
Hi, I have a Kuka KR150 with the PM6-600 servo driver. I'm trying to gather enough information to decide if retrofitting a new control is feasible. Has anyone done anything like this, yet? I've done a...
View ArticleEncoder to Resolver converter?
Does such a thing exist? I have a Baldor servo drive that is set up for using with a resolver. I also have a spare servomotor with a quadrature encoder. Is there any way to use these two together?...
View ArticleNeed Help! Programming Question
Im running a Nexus 510C vertical centre with Mazatrol 640M controler. My question is, if i am using a manual program unit to helical interpolate a boss,is there a repeat command i can use to make the...
View ArticleNew Machine Build High/Low Speed winding
I have to installa a Fanuc A06B-1471-B133 motor, in the datasheet are indicated high and low speed winding data. How can I switch bethween the two mode? I was think was a star/triangle connection but...
View ArticleWhat files do I need to backup
I'm a little confused with file backups on Fanuc controls. Can you just backup the SRAM from the boot menu? Does the SRAM contain the programs, offsets, parameters, ladder, etc.? Do I need to backup...
View ArticleOneCnc Xr5, Professional for sale.
For sale is a seat of OneCnc Xr5, professional. I bought OneCnc to personally use at the shop I work at. The shop now has mastercam so I don't find myself using OneCnc as often since noone else in the...
View ArticleOneCnc Xr5, Professional for sale.
For sale is a seat of OneCnc Xr5, professional. I bought OneCnc to personally use at the shop I work at. The shop now has mastercam so I don't find myself using OneCnc as often since noone else in the...
View ArticleOneCnc Xr5, Professional for sale!
For sale is a seat of OneCnc Xr5, professional. I bought OneCnc to personally use at the shop I work at. The shop now has mastercam so I don't find myself using OneCnc as often since noone else in the...
View ArticleClik here to view.
Newbie What machine can do this?
The picture is of a part I want to make. It has to be cut from one piece of hardwood. The "knob" has a total height of 8 mm, so the entire part needs to be milled, and carved out, from an 8mm sheet....
View ArticleHow many programs ?
I was just wondering how many programs our cusomers create over a week, month or year. The reason I ask is that I was speaking to a customer who bought the software in December 2011, he produced 3...
View ArticleClik here to view.
UPCOMING -ArtCAM Insignia Online Demo- Wednesday November 28th | 2pm EST
Hi All I figured I'd post up this information about an upcoming online demo for the Artcam Insignia software as it may be useful and of interest to some. Please be aware that it if it something of...
View ArticleApparent short sightedness of U.S. Companies
I am continually surprised at the attitude of Some U.S. Co.'s that will not, or appear not to ship to Canada? My latest inquiries with a US company, ProCut Systems which incidentally is only 600mls...
View ArticleNeed Help! ALARM MESSAGE: 1017 - ATC INITIAL POS
Here the company has a machining center Enshu-VMC40 with controller Fanuc 0M-B. After returning to ground zero gave the command to run a program from memory to test. The test was to see the machining...
View ArticleSmall bits for Bosch Colt
I have a Bosch Colt 1 HP router on my CNC machine with a 1/4" collet. I am looking for smaller bits for finer detail. The smallest I have is 1/8". What are my options? Can I get 1/4" bits with the...
View ArticleBlack Friday tool deals I found.
Here are some of the Black Friday tool deals I found. Add more so no one misses out on a good deal. Bill EZ Tracksaw 50% off on Amazon Amazon.com: EZ Tracksaw System 54" with NEW SMARTBASE SPECIAL...
View ArticleClik here to view.
Build Thread Water Table Build for DynaCNC table.
I thought I would share my water table build for my DynaCNC Dual Plasma/Router table. I have been using the machine for wood routing for the last 7 years but have now decided to build a water table so...
View Article