New Machine Build Signright Woodworking CNC Engraver
Dear Sir or Madam, How are you ? I'm Daniel from Signright company China, we produce different series of CNC Engraver ,both Heavy duty and Light machines , for example , for Woodworking--single or...
View ArticleNewbie where's my tool change program stored?
Hi I'm trying to make sure I have everything backed up on a 0-m fanuc tape drill mate and I can't find any tool change program. I have set P0010.4 to zero and I can't see any 9000 or 8000 programs...
View ArticleJust In New and Need HELP
Hi, I'm Chris Judas. I live in Iowa and I am looking for any and all suggestions on what type/size of machine I should get. I am close to retiring and want to make signs, lithos and whatever else I can...
View ArticleNeed Help! YES IM NEW AND NEED HELP!!!!
Hi, I'm Chris Judas. I live in Iowa and I am looking for any and all suggestions on what type/size of machine I should get. I am close to retiring and want to make signs, lithos and whatever else I can...
View ArticleHarbor Freight/Central Machinery Heavy Duty Milling/Drilling Machine
Harbor Freight Central Machinery Heavy Duty Milling Drilling Machine | eBay I can provide any other info you want that's not in the videos.
View ArticleNeed Help! New BoB Site ? ? ?
New site on this link.It does not say BoB Forum,,but it sure looks all BoB. CAD/CAM Software
View ArticleNeed Help! Stepper Driver Settings (Microstep and Current)
Hi Everyone I am using a YKC2405M Microstep driver (Product Detail_stepping mot?? driver /steppin mot??/servo mot??/servo driver) with 57HB76-304 Stepper Motor (57HB series of two four phase hybrid...
View ArticleWTB. OneCnc Lathe
Hello Looking to see if anyone has OneCnc lathe for sale. just picked up a cnc lathe now searching for some software. Thanks, Scott
View ArticleClik here to view.
RFQ - two parts fabricated from 1/2 x 1" x 6" steel using slitting saw
I have two parts that I would like fabricated from steel. I've designed the parts so that they should be able to be fabricated using 1/32" slitting saws (possibly ganged) and from 1/2" x 1" x 6" bar....
View ArticleClik here to view.
RFQ - two parts fabricated from 1/2 x 1" x 6" steel using slitting saw
I have two parts that I would like fabricated from steel. I've designed the parts so that they should be able to be fabricated using 1/32" slitting saws (possibly ganged) and from 1/2" x 1" x 6" bar....
View Articlepewter candy molds
Anyone know how the old fashioned pewter candy molds were made? I'm thinking about sand casting my rubber molds into metal, but there's got to be a better way. ....George
View ArticleNeed Help! Can anyone confirm the amp rating of the KL23H276-30-8B?
The website text says 3A, the spec sheet says 4.2A...... I'm inclined to trust the spec sheet, but just in case.... can anyone verify?
View ArticleThinning acrylic solvent?
Hey, I have some Weld On 16 here, which is the thicker variant. I was wondering, could you actually dilute it with acetone to obtain a thinner glue? Dan
View ArticleNeed Help! Fanuc 18i_MB
Dear experts on this Zone. We have Millstar m/c with Fanuc 18i-MB. The problem is when we are running part program CNC stops in the middle. And CNC gets hang up. We can not operate any button on CNC ....
View ArticleReplacement for arcing ballast resistor on DC-K40
My Chinese eBay laser (DC-K40IV) is working well - after the usual "maintenance" like putting the bits that had fallen off back on again. However I noticed yesterday that the ballast resistor has a...
View ArticleClik here to view.
Problem Machining only part of a flat?!?
This part was imported from Autodesk Inventor using the import plug-in. So no IGES problems this time. The other half of the mold worked great in SprutCam - just about the easiest file I've prepared...
View ArticleClik here to view.
Problem Trim 2 entity
So this is what I worked on today, I used an interpolated line over a picture in bobart,then scaled to the correct size- Now I cannot trim the extra off the canopy, what is the fix for this? Also, how...
View ArticleNeed Help! Need input on Bridgeport stepper settings/tuning in Mach3
Hoping to get feedback on what people have had success with in Mach3 motor tuning with Bridgeport steppers. I am running with a 72 volt power supply, gecko's 203V at 7amps. Bridgeport Sigma stepper...
View ArticleNewbie Keyboard Shortcuts
Does someone have the list of keyboard shortcuts for Bobcat Sometimes when trying to draw a line that goes out of the screen, i need to move the part to the left so i can get to the last entity without...
View Article21st Century Woodworking Project 001: Z Axis Touch Plate Demo
Got the z touch probe installed and working. Check it out: Come to 21st Century Woodworking - Traditional Woodworking with 21st Century Tools to get the project files and all the macros to set this up.
View Article