C-program questions- Dissallow into limits
First of all let me just say I have been really pleased with the kanalog/kflop boards that I purchased for my mill. I retrofitted an old motionmaster 5x5 3 axis mill that had analog drives and dc...
View ArticleNeed Help! Milling external Radius
Hi Guys I have a round bar of ~42mm mounted vertically and I need to create a 6mm radius around the corner. I would be using a ball-nose cutter of 8mm diameter. I can set this up manually with a lot of...
View ArticleClik here to view.
Waste rail
Here are a waste rail I designed for our work shop. Its small, only W:35 x D:50 x H:85 cm so it does not take to much space. Attached Images Søppelstativ_02.JPG‎ (32.1 KB) Søppelstativ_03.JPG‎ (56.3...
View ArticlePulsar Servo Lever Draw Bar
Here is the video on the operation of the PULSAR Servo lever draw bar. A simple pull of the lever and quickly change your tool. No air or power needed! See the operation at the link below. More to...
View ArticleClik here to view.
Need Help! Connecting Breakout board to Stepper Drivers
Hi, I bought a Breakout board and stepper drivers to change my 3 axis TB6560, but I don't find the connection schema My breakout board 12560176.jpg And drivers ... 16200069.jpg Thanks a lot Attached...
View Articlei need aspire 3d software ,can u help me?
hi alls. i need aspire 3d software ,can u help me?
View ArticleCNC 6040 - weak 4th axis
Did anyone else experience the 4th axis on the YOOCNC/carving-cnc 6040 to be very weak? The stepper is much smaller then on the other 3 axis, wich is fine (given it's limited travel distance and thus...
View ArticleProblem Problem drilling
Dear All, I have anew setup for PCB processing. I am facing a problem in drill M/L FR4 material in diameter .80mm. Chips evacuated get fixed on the top of drill. What is the solution. Kindly...
View Articlehelp with bmc 25
Hi , looking for some help guys , just got an old 1990 BMC 25 set it all up and it has issues , it boots up fine (max32 control)but needs the axsis calabrating as soon as you try and do this it errors...
View ArticleClik here to view.
Dust Extractor Anyone Used one for vacuum former ?
Hi guys I have built a vacuum former and having some troubles with it being the first one I have made. The specifications are as follows, the platen is 400mm (16inch) x 250mm (10inch) so not really a...
View ArticleNeed Help! D39 Powder Metal Comparison
I've also posted this in other area's and was wondering if anyone has any experience in machining D39 powdered metal? I'm trying to find a comparative material that is in my copy of the Walter CCS...
View ArticleD39 Powdered Metal comparison
I've also posted this in other area's and was wondering if anyone has any experience in machining D39 powdered metal? I'm trying to find a comparative material that is in my copy of the Walter CCS...
View ArticleNeed Help! D39 Powdered Metal
I've also posted this in other area's and was wondering if anyone has any experience in machining D39 powdered metal? I'm trying to find a comparative material that is in my copy of the Walter CCS...
View ArticleNeed Help! D39 Powdered Metal Machining
I've also posted this in other area's and was wondering if anyone has any experience in machining D39 powdered metal? I'm trying to find a comparative material that is in my copy of the Walter CCS...
View ArticleNeed Help! D39 Powdered Metal comparison
I've also posted this in other area's and was wondering if anyone has any experience in machining D39 powdered metal? I'm trying to find a comparative material that is in my copy of the Walter CCS...
View ArticleProblem Predator Colors - Syntax Highlighting.
As there is no Forum for Predator and it came packaged with Bob, I thought it best to post this here. Colors, Syntax Highlighting settings do not stick and if I open Predator outwith Bob then they...
View ArticleNeed Help! Bridgeport series II interact 4
Recently purchased one of these and I have a couple of questions. The Bridgeport manual is not very clear. How do I position the start point on the job manually? I have tried entering the co-ordinates...
View ArticleClik here to view.
KFlop with KAnalog Step and Dir for Yaskawa SGDH PULS/SIGN inputs
I need to determine how to connect the STEP and DIR signals from KFlop JP4/JP6 (muxed because I am using KAnalog) to Yaskawa SGDH servo drives. Yaskawa Docs: Reference by Pulse Input Positioning is...
View ArticleAdvice on a simple single axis setup
Hi all, this is my first post here but ive been a lurker for awhile.i'm basically building a small custom lathe, which needs (ATM' at least!) a single-axis motion (in addition to the chuck rotation). i...
View ArticleNeed Help! Fanuc 0T-A Parameter Backup
Help please, anyone. I need to back up the parameters on a very old Fanuc 0T-A system, older than I have worked on before. Could anyone please advise a procedure? Thanks in advance.
View Article