Need Help! Cutter Comp. G41, DX-32

Please revise this program using Cutter Comp.

1. I am trying to mill the O.D. of a 4.0" diameter arc. Using a clock for an
example, the cutter will start at the 8 (cutting in the clockwise direction) and
end at the 4.
2. I will be using a .750 diameter end mill.

Many Thanks,

Bob



M26
T1 M6
S1000 M3
G0 X-1.7892 Y-.9159 Z.1 (Start Point)
G1 Z-.1 F20.0
G2 X1.7892 Y-.9159 (End Point)
M22