Quantcast
Channel: CNCzone.com- Largest Forums for CNC Professional and Hobbyist alike!
Viewing all 72927 articles
Browse latest View live

Anilam 1100M C path drive lost

$
0
0
Can you please help.
We have deleted the C drive Path, in user directory files.?

GENERAL SOFTWARE

then


PROGRAMME SET UP

Q1 .M
Q2 SHORT
Q3 NAME
Q4 NEVER
Q5 YES
Q6 ???? this we have lost!!!! we have tried C:\ user

But the control does not recognise any combinations we have tried.
Can anyone please advise on the correct and exact code please.
Thank you


Need Help! How do I activate and conect a dnc to a O-MD without tape mode?

$
0
0
I have a Leadwell V20 with Fanuc O-MD without tape mode and I want to know how do I use dnc with it. if you can detail it step by step it would be very helpful.

okuma lb15 powerbutton

$
0
0
I need to replace this item i can not get a part number and so far hartwig has been no help.
does any body have any info that can help
osp 5000l-g control

Need Help! engraving on plastic project boxes

$
0
0
I have plastic project boxes and wondering if I can use a laser to put text on box?

My Fadal 4020 Kflop Retrofit

$
0
0
Hi Guys,

I've had a lot of people ask me details on my Kflop retrofited 1994 Fadal 4020. I decided to make a thread about my machine and post some things ive learned and some of the wiring information i have figured out about Fadals along the way. Hopefully it makes things easier for someone. So heres my story...

I bought my machine last summer and the previous owner had already started the Kflop conversion. He had the three axis moving, spindle somewhat working, waylube and drawbar working. Basically got the bare minimum done to actually make a part and then stopped. Bit of a sloppy job as well, but i had a good head start with the machine. Here are some pics of the machine when i got it:

Attached Images

high precision cnc router machine with atc

$
0
0
Hi there ,this is monica from Rapidcnc macinery .Today I would like to introduce one of our highest precision cnc woodworking machine with auto tools changer :Rapidcnc machinery R1325ATCE.
This machine is build with full 3 axis taiwan ballscrews .I guess you should know that it is much accurate compare to rack pinion machine .
Machine major specification such as : Syntec controller ,taiwan Yaskawa servo motor ,TBI/Hiwin square orbits ,9.0Kw air cooling spindles ,vacuum table ,dust collector etc .
All the spare parts are top level ,for more inforamtion ,you are welcome to visit our website:China CNC Router, Plasma Cutting Machine, CNC Drilling Machine, Laser Machine,cnc routers ,cnc router wood,woodworking machine,ATC cnc router,cnc engraver,cnc carving machine ,auto tools changer cnc ,router cnc,cnc laser machine,glass cutting machine
My email:monica@rapidcncmachinery.com .
Contact with me if U are interested .


Attached Images

Problem Engraving is Smaller than DXF file.

$
0
0
So I recently upgraded my engraver to a larger work area and am now having an annoying issue. All of my prints are coming out about 28% smaller then what it DXF is scaled too. For example I tried to engrave on a 9.5 inch piece of wood that should have been pretty much covered but the design came out at about 6 inches only. This is a consistent issue with the only change to the system being the frame. All of the electronics are the same as before. I figure it's a software issue somewhere since what work it does do is as it should be, but with a 28% size reduction.

Alternate Homing method

$
0
0
Any Tormach owners out there not using the homing switches?. I noticed a method mention in the manual to shut off switches and then manually homing the mill using preset indicators, scales or some other method that would be more accurate then a roller switch.


Looking for Apprentice Hi need help with my haas program

$
0
0
Hi have a haas vf4ss when I am machine a Complexed job with loads of little pockets it keeps leaving little marks where the tool start to ramp down before it get to where the pocket is if I put absolute stop Check on this will not happen but the cycle time will Increase loads does anyone else have this problem and know how to fix

WTB: Tormach 440 or 770

$
0
0
Looking for a used 440 or 770. I'm located in germany so seller should be within europe. Wanted to buy a new one directly from tormach but importing it to germany seems so expensive, maybe a good used one is more worth it.

I'm also open for a comparable machine (if there is one? :)), machining aluminium for the most part.


Best regards,
Kai

Problem 2395 Alarm-B User Reserve code 92 ‘PROBE OPEN’

$
0
0
We are having issues with our Renishaw RMP60 probe and the RMI-Q reader. The Okuma COntrol is an OSP-300

2395 Alarm-B User Reserve code 92 ‘PROBE OPEN’

We have swapped out the Probe and still have the same problem. Has anyone been through this? If there is a next step on troubleshooting I would like to know. The machine is still under warranty but it needs to run soon.

Need Help! Gecko board 540 with 5A stepmotor?

$
0
0
Hi :)

I'm going to build a CNC machine and considering buying a Gecko board 540. I have step motors and drivers. It is 5A stepper motors.
Is it possible to get a gecko board that is identical to a 540 board, with the ability to connect external drivers to, rather than the G250 X drivers that are in a standard 540 board. Or is it possible to connect a 540 board to 5A stepmotors? It is not necessary for motor to provide 100%.




Here are the specifications of the engines and drivers we want to use
Step Motor Driver
https://www.omc-stepperonline.com/st...t-dma860h.html




stepper motors
https://www.omc-stepperonline.com/hy...s59-5004s.html

Fault in program

$
0
0
Hi have a haas vf4ss when I am machine a Complexed job with loads of little pockets it keeps leaving little marks where the tool start to ramp down before it get to where the pocket is if I put absolute stop Check on this will not happen but the cycle time will Increase loads does anyone else have this problem and know how to fix

Fanuc OT z axis positioning

$
0
0
My Goodway GCL3'is not giving accurate measurement on parallel turning on z axis but on the screen it shows the correct distance moved. Please advise on solutrion

Indramat TVR 3.1-W015-03

$
0
0
Has anyone drawn out the power circuit of this power supply? I have one for repair and have started to draw out the circuit, but having not seen one before, i would love it if anyone could confirm my drawings.

Rich

UK


2004 VF6 Help

$
0
0
Thanks for reading, We just got a 2004 VF6 and I got it all set up and ran test cuts last night, very happy with the circularity of the holes it made, but its kind of nerve wracking not being able to see the current position while the program is running, is there a parameter or setting I can change to make this visible? The only thing that shows at this point is lines of G code. I haven't been on a Haas in several years so I'm rusty on a lot of the control, been running Fadals. Thanks again

V Carve last pass feature?

$
0
0
Hello again.

Can you give me a bit of advise?

I'm cutting 9mm MDF with 3 passes for a logo protect. When its finished, there are 2 lines showing on the edge (from the separate passes). I can sand them out but its quite time consuming.

I saw the feature that lets the last pass have a separate offset, so I made it 0.2 and its definitely better, but still not a clean flat edge.

Will the additional 'reverse on last pass' function improve this?


Thanks.

Need Help! Makino EDNC32 MGC3

$
0
0
Hello, there,

Yesterday the boss "rejoiced" with a new "interesting problem". Very funny.


There is a problem with Subject at the configuration part.
Is it possible to enter macro data without punch cards? (because I have no them)
I hope someone has already encountered such a problem.

Best regards,
Steve

Need Help! Need help with running long parts on a M32 Citizen

$
0
0
Good afternoon ALL,

My name is Chris I'm the CNC Operations Manager at Gem City in Ohio, we have a M32 Citizen screw machine that has always ran short parts and we are now looking to run a part 19.25 long. so we need the long part adapter to allow this but they are in japan and are back ordered. Has anyone made a work around for this? We can make the cabinets and parts here.

Machinist

$
0
0
Career Opportunity: Machinist on 2nd Shift with Fecon in Lebanon, OH

Do you have strong mechanical skills? Can you operate CNC machines to create parts to make our world class products? Do you enjoy working in a positive, energetic team environment? If so, we want you to join our team!

Fecon is a leading manufacturer in the Forestry and Construction Industries for track carriers and attachments. Our international headquarters is located in Lebanon, Ohio and is home of the Bull Hog® mulcher. Fecon is continually adding to and advancing our robust product line. In fact, we’ve recently added an additional 40,000 square feet of manufacturing space. There’s room for you to come and join this company on the move.

Our machinists are an integral part of our collaborative team by machining parts that are critical to the high quality of our end products. The successful individual will perform machine setup and operation during our 2nd shift working four 10s from Sunday through Wednesday. This position will also be responsible for the following activities:

• Planning sequence of operations, applying knowledge of physical properties of the metal.
• Inspecting workpiece for defects.
• Measuring workpiece and verifying dimensions and weight, using micrometer, template, straightedge and scale.
• Maintaining the machinery and keeping the work area clean and orderly.

Required Qualifications:

• High School Diploma or equivalent
• 2+ years previous experience with boring or milling machines
• Ability to read and interpret blue prints, drawings, and machine sketches
• Ability to tweak G-code programs is a nice to have skill
• Ability to lift 50 pounds
• Ability to operate overhead cranes and jib cranes

This is an exciting opportunity to do something extraordinary: join a growing team that produces great equipment in the USA that is used around the world. Come join us by applying online at Machinist Jobs in Lebanon Ohio | Job Recruiters or submit your resume and salary requirements to job@strategichrinc.com.

Employer is EEO/M/F/D/V. Please no third party candidates or phone calls.

Viewing all 72927 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>