Hello all, i'm hoping for some assistance in wiring up a 3phase motor to a VFD. I cannot find a wiring diagram for this motor, which is a Euronorm H 71-2 as near as i can figure. Two things are throwing me off initially.
1. delta or wye connection? i've searched a little on this, and the info i've come up with doesn't seam to match the markings on my motor as far as bridging connections. the motor is rated at 230V, so my best guess is that i need a delta connection.
2. what do i do with the capacitor looking thing? it has threaded stud on it, do i connect this to ground?
I've attached a couple pictures, one of the motor itself, and one of the connections in the motor terminal area. any help is much appreciated.
thanks,
Brian
1. delta or wye connection? i've searched a little on this, and the info i've come up with doesn't seam to match the markings on my motor as far as bridging connections. the motor is rated at 230V, so my best guess is that i need a delta connection.
2. what do i do with the capacitor looking thing? it has threaded stud on it, do i connect this to ground?
I've attached a couple pictures, one of the motor itself, and one of the connections in the motor terminal area. any help is much appreciated.
thanks,
Brian