Hi to everyone,
Our Mazak 20/40B has an intermittent spindle lube alarm for a couple of years now and its close to being resolved now but could do with some advice.
Ok ive changed pressure switch on spindle, servicing guru friend has changed relay, and have checked pickup pipe oil screen for cleanliness and it was spotless,
oil is new and of correct type, we also changed card no. 763 as we had a spare.
Service guy asked me to check alarm on diagnostics, it shows on X42 chiller alarm H08 -2 where the no. 76543210 are shown on screen, there is a no. 1 under the 2 where it should be 0
So therefore trouble is in chiller, there is no alarm light showing on chiller unit.
We have complete spare chiller unit as we bought spare m/c to wreak for spares, but its stored 400 miles away and i will only pick it up if necessary.
Any clues as to what is wrong inside chiller unit would be helpful cheers
Our Mazak 20/40B has an intermittent spindle lube alarm for a couple of years now and its close to being resolved now but could do with some advice.
Ok ive changed pressure switch on spindle, servicing guru friend has changed relay, and have checked pickup pipe oil screen for cleanliness and it was spotless,
oil is new and of correct type, we also changed card no. 763 as we had a spare.
Service guy asked me to check alarm on diagnostics, it shows on X42 chiller alarm H08 -2 where the no. 76543210 are shown on screen, there is a no. 1 under the 2 where it should be 0
So therefore trouble is in chiller, there is no alarm light showing on chiller unit.
We have complete spare chiller unit as we bought spare m/c to wreak for spares, but its stored 400 miles away and i will only pick it up if necessary.
Any clues as to what is wrong inside chiller unit would be helpful cheers