Hey Guys I'm considering a build using a Gecko Drive G201X it is 2.5 x 2.5 inches and I have a NEMA 4x enclosure I would like to put it into. The enclosure is 4.75 x 4.75 on the inside giving me about 1.1 inches on all sides. The enclosure is made from Cast Aluminum so I figure it will have good heat dissipation but I'm still concerned about it over heating.
The specs for the drive are at:
G201X 10 Microstep Digital Drive
The specs for the enclosure are at:
SG-AL-121208 | Cast Aluminum Project Box | 120x120x80 | Lite Cycle
The specs for the drive are at:
G201X 10 Microstep Digital Drive
The specs for the enclosure are at:
SG-AL-121208 | Cast Aluminum Project Box | 120x120x80 | Lite Cycle