Is there a smaller diameter 3 phase vfd controlled spindle? I see an air cooled one upto 1.5kw and both air and water cooled 0.8kw units that are 65mm, but I have an idea for a conversion that would benefit from a unit a little bit smaller. Not in horsepower, but it in diameter. A little longer would not hurt a bit.
65mm is really squeaking it. 50-55 would be perfect. Can't really go below 1HP (0.75kw apx)
65mm is really squeaking it. 50-55 would be perfect. Can't really go below 1HP (0.75kw apx)