I got for free a very nice 1/4" carbide boring bar: Glanze S06F SCLDR/L 04.
According to the Glanze product info,
Glanze Indexable Tool Holders : Screw Clamp Boring Bar Suitable for 90o Boring & Facing (S- SCLCR) this boring bar
takes carbide inserts of CDMT 04T1 type. These are 80 degs diamond shaped
inserts.
I've searched everywhere and nobody seem to carry these inserts. I have one, and
it measures an ID of .185", in between the CDCD 0.156" and the CCMT 0.25". The
thickness is identical to the CCMT inserts (0.094").
Any idea where I can buy such inserts? They don't seem to be carried by the
usual suspects (Travers, etc...). Or perhaps there is an equivalent that I am
not aware of?
According to the Glanze product info,
Glanze Indexable Tool Holders : Screw Clamp Boring Bar Suitable for 90o Boring & Facing (S- SCLCR) this boring bar
takes carbide inserts of CDMT 04T1 type. These are 80 degs diamond shaped
inserts.
I've searched everywhere and nobody seem to carry these inserts. I have one, and
it measures an ID of .185", in between the CDCD 0.156" and the CCMT 0.25". The
thickness is identical to the CCMT inserts (0.094").
Any idea where I can buy such inserts? They don't seem to be carried by the
usual suspects (Travers, etc...). Or perhaps there is an equivalent that I am
not aware of?