Hello all,
I have a Moriseki I am working on with a 6T control and I need to replace some of the turret position switches. They are PNP and NOT the TL-M2ME2 (NPN, NC). When I looked up the PDF for the TL-M2ME2 it does not show a PNP variety and the TL-M2ME2 seems to be obsolete.
I have some TL-M2ME2 proximity so I thought I would use a relay to switch the input. Apparently, the input is floating and I need a pull down resistor to make it work. Unfortunately, I don't know the resistor size needed but it should not be too hard to figure out.
Does anyone have a cross reference for the TL-M2ME2 to PNP and know the pull down resistor value needed to make the relay work as a temp fix until I can get the right parts?
Does it seem odd this machine would have PNP inputs? It has been awhile since working on a vintage SL-3 but I seem to remember they were NPN. The I/O board is a A20B-0007-004.
I have a Moriseki I am working on with a 6T control and I need to replace some of the turret position switches. They are PNP and NOT the TL-M2ME2 (NPN, NC). When I looked up the PDF for the TL-M2ME2 it does not show a PNP variety and the TL-M2ME2 seems to be obsolete.
I have some TL-M2ME2 proximity so I thought I would use a relay to switch the input. Apparently, the input is floating and I need a pull down resistor to make it work. Unfortunately, I don't know the resistor size needed but it should not be too hard to figure out.
Does anyone have a cross reference for the TL-M2ME2 to PNP and know the pull down resistor value needed to make the relay work as a temp fix until I can get the right parts?
Does it seem odd this machine would have PNP inputs? It has been awhile since working on a vintage SL-3 but I seem to remember they were NPN. The I/O board is a A20B-0007-004.