Hi.
I have a Yamazaki Mazak AJY with Mitsubushi Mazatrol M-32 control. The machine is eqipped with 5 Axes but mostly we use only 3 Axes. Recently the drive for 4th and 5th axis has become faulty. The diagnostic is in progress. There is an alarm message "NC Alarm" at the controller in the electrical cabinet. There is no alarm message at the main display. Machine is not in working condition even in 3-Axis moe by disabling 4th and 5th axis from PARAMETER---> Machine--->Blank Key press---> 1131 enter---> at Line 1, change digit 4 into 2.
Actually I want to use machine in 3 axis mode until i get that drive repaired by disabling 4th and 5th axis drive by some other mean (as above disabling procedure did'nt worked) . Anybody have any idea how to disable faulty 4th and 5th axis drive.
I have a Yamazaki Mazak AJY with Mitsubushi Mazatrol M-32 control. The machine is eqipped with 5 Axes but mostly we use only 3 Axes. Recently the drive for 4th and 5th axis has become faulty. The diagnostic is in progress. There is an alarm message "NC Alarm" at the controller in the electrical cabinet. There is no alarm message at the main display. Machine is not in working condition even in 3-Axis moe by disabling 4th and 5th axis from PARAMETER---> Machine--->Blank Key press---> 1131 enter---> at Line 1, change digit 4 into 2.
Actually I want to use machine in 3 axis mode until i get that drive repaired by disabling 4th and 5th axis drive by some other mean (as above disabling procedure did'nt worked) . Anybody have any idea how to disable faulty 4th and 5th axis drive.