Problem G0 works in MDI but not in a program...

Howdy,

I have LinuxCNC 2.5 and have the steppers all cool but have one problem.

I did the Stepconfig wizard and the test axis works fine...speed/accel.

In LinuxCNC however if I do a G0 move in a g code program it doesn't G0 ;)

In MDI it does !!!! It seems like the federate is ignored as well since I tried bumping it way up... like F100.

Is this a simple fix? I'm not losing steps, everything seems fine except for this problem.

Thanks!
Nelson