Hi!
Okuma LC30 ST2 OSP5000L.
After the starting machine the alam appears:
905 OILFILTER 1
I have read the operation & maintenance manual.
The description:
The oil filter was clogged to actuate the pressure switch and the pressure switch was kept actuated for more then two seconds
(Bit 4 of EC input #1 is 1).
I tried to find this BIT4 of Interface Card EC, and looks like only the socket E0-2 (pin 16), in electrocheme it connects to PS2C (Chuck Oil Pressure).
I tried to connect this wire to ground to obtain 0 evrytime, but unsuccessfull.
Can anybody solve this problem?
May be I touch not the same Pressure Switch?
The photo of Pressure switch is in attach.
Okuma LC30 ST2 OSP5000L.
After the starting machine the alam appears:
905 OILFILTER 1
I have read the operation & maintenance manual.
The description:
The oil filter was clogged to actuate the pressure switch and the pressure switch was kept actuated for more then two seconds
(Bit 4 of EC input #1 is 1).
I tried to find this BIT4 of Interface Card EC, and looks like only the socket E0-2 (pin 16), in electrocheme it connects to PS2C (Chuck Oil Pressure).
I tried to connect this wire to ground to obtain 0 evrytime, but unsuccessfull.
Can anybody solve this problem?
May be I touch not the same Pressure Switch?
The photo of Pressure switch is in attach.