Hi,I have converted some of this controllers but for some dumb reason I have never share this information and I find out is nothing out there showing how is done and is a lot of this machines from the small wood cutting cnc routers to small cnc mills /lathes and the most heavy prolight machines,here is how is done for you to retrofit or convert your controller to work with mach 3 with no extra stuff ,cards etc,the spindle part I never enable the spindle with the parallel i always use a jumper,I hope some one has a good idea ,I will try to implement some kind of switch to be enable with parallel but if some one has a good idea is welcome for sure.
Please be nice, I know my writing may not be the best but English is my second language.
I attach a pdf i try to reduce the size for easy sharing, Enjoy.
Moderators please if this is not the correct place to put this please move it.
Please be nice, I know my writing may not be the best but English is my second language.
I attach a pdf i try to reduce the size for easy sharing, Enjoy.
Moderators please if this is not the correct place to put this please move it.