drill-edm-sd400-znc__i1l_1__4.jpg
able to install the rotary table (A axis) for sparking, combined with sparking, automatically to rotate the table while machining [Option]
1. High speed MOSFET driven machining circuit for fast machining and high, medium, and low voltage options. Ideal for fine hole (with reduced copper tube wastes) and special substance machining.
2. Micro-computer based control system.
3. Intelligent deep hole machining. Simply enter desired machining current and all other machining parameters are set automatically.
4. Parameter changes during machining.
5. Power failure memory can last for 10 years.
6. Auto rotate release of workpiece after machining is completed.
7. X and Y axis optical scale with resolution up to 0.005mm and Z-axis decoder.
8. Auto Z-axis reset for machining re-counting.
9. Machining depth and coordinates display switch.
10. Capable of machining super hard alloy metal in irregular, sphere, and curve shapes.
11. Machining copper tube of diameter above 0.21mm with pure water for better safety while those of diameter between 0.008 and 0.2mm are machined with EDM oil for more precise hole diameter.
For any further information, please go to website:Drill EDM for OSCAR E.D.M. COMPANY LTD.
able to install the rotary table (A axis) for sparking, combined with sparking, automatically to rotate the table while machining [Option]
1. High speed MOSFET driven machining circuit for fast machining and high, medium, and low voltage options. Ideal for fine hole (with reduced copper tube wastes) and special substance machining.
2. Micro-computer based control system.
3. Intelligent deep hole machining. Simply enter desired machining current and all other machining parameters are set automatically.
4. Parameter changes during machining.
5. Power failure memory can last for 10 years.
6. Auto rotate release of workpiece after machining is completed.
7. X and Y axis optical scale with resolution up to 0.005mm and Z-axis decoder.
8. Auto Z-axis reset for machining re-counting.
9. Machining depth and coordinates display switch.
10. Capable of machining super hard alloy metal in irregular, sphere, and curve shapes.
11. Machining copper tube of diameter above 0.21mm with pure water for better safety while those of diameter between 0.008 and 0.2mm are machined with EDM oil for more precise hole diameter.
For any further information, please go to website:Drill EDM for OSCAR E.D.M. COMPANY LTD.