Hi All
I know this sounds crazy but I need a wiring diagram to install a new main power board the one bolted inside the control box. My unit has 2 fuse holders on the back one for the line power and one for the motor. several of the wires are on different pins and numbers than the out dated 2011 drawing in the manual. I can't seem to get one from Grizzly even though I have a case number no one ever gets back to me or sends an Email of the new machine wiring. Mine also came from the factory with the 3 bolt head mod and some other changes that are not in the manual. I should not have taken out the board to see where the smoke came from before I got a new board from Grizzly. I just thought the schematic was up to date. Some of the pin iDs on the board is not the same as the schematic either. Like the V pin is not marked on the board, not sure where that wire goes.
Thanks for any help.
CH
I know this sounds crazy but I need a wiring diagram to install a new main power board the one bolted inside the control box. My unit has 2 fuse holders on the back one for the line power and one for the motor. several of the wires are on different pins and numbers than the out dated 2011 drawing in the manual. I can't seem to get one from Grizzly even though I have a case number no one ever gets back to me or sends an Email of the new machine wiring. Mine also came from the factory with the 3 bolt head mod and some other changes that are not in the manual. I should not have taken out the board to see where the smoke came from before I got a new board from Grizzly. I just thought the schematic was up to date. Some of the pin iDs on the board is not the same as the schematic either. Like the V pin is not marked on the board, not sure where that wire goes.
Thanks for any help.
CH