Not really a mastercam problem but thought I'd ask here since I use mastercam to program.
How do you deal with vibration marks on the interior corners of a pocket where you're hanging a small tool out.
What strategies have worked for you?
I'm currently working on a part with 1.75" deep pockets with internal corner radius' of .125"
For shallow pockets, using a smaller size end mill works well, but when going 7xD I need to use the beefiest tool available and going down to a 3/16 tool doesn't see feasible....but maybe it is...I haven't tried.
I guess this isn't limited to inside corners but that's where vibration is most prevalent.
Thanks for the input.
How do you deal with vibration marks on the interior corners of a pocket where you're hanging a small tool out.
What strategies have worked for you?
I'm currently working on a part with 1.75" deep pockets with internal corner radius' of .125"
For shallow pockets, using a smaller size end mill works well, but when going 7xD I need to use the beefiest tool available and going down to a 3/16 tool doesn't see feasible....but maybe it is...I haven't tried.
I guess this isn't limited to inside corners but that's where vibration is most prevalent.
Thanks for the input.