I have run a program countless times on a Fanuc machine and are now running it on a Okuma v56a
there is one line of code in the sub so far that gives it a head trip
the machine comes up with a alarm to do with mirror #2253 command 3
Any help out there
OS1
G1Y8.8F500
G91A-360.0
G19
G2K-32.0A-360.0F174
G2K-33.0A-360.0F176
G2K-34.0A-360.0F178
G2K-35.0A-360.0F182
G2K-36.0A-360.0F186
G2K-37.0A-360.0F190
G2K-38.0A-360.0F194
G2K-39.0A-360.0F196
G90Z85.0
G17
RTS
there is one line of code in the sub so far that gives it a head trip
the machine comes up with a alarm to do with mirror #2253 command 3
Any help out there
OS1
G1Y8.8F500
G91A-360.0
G19
G2K-32.0A-360.0F174
G2K-33.0A-360.0F176
G2K-34.0A-360.0F178
G2K-35.0A-360.0F182
G2K-36.0A-360.0F186
G2K-37.0A-360.0F190
G2K-38.0A-360.0F194
G2K-39.0A-360.0F196
G90Z85.0
G17
RTS