I bought a used Syil X3 mill that the spindle motor was not working on. The Lcd also does not work. I removed the front panel on the head and can see some burned out parts on the board. I can only guess that the owner before me shorted it out by trying to remove the cover without lowering the quill and turning off the power first.
So now the big question is what do I do now? Can I fix the board or do I need a new one? Is it likely that other parts are blown on other boards? I hear the relays click when I tell mach3 to turn the spindle on and off so I know there is power to that part of the machine. Just no spindle power. All fuses that I can find check out fine. The X, Y and Z all move fine with mach3.
Bret
So now the big question is what do I do now? Can I fix the board or do I need a new one? Is it likely that other parts are blown on other boards? I hear the relays click when I tell mach3 to turn the spindle on and off so I know there is power to that part of the machine. Just no spindle power. All fuses that I can find check out fine. The X, Y and Z all move fine with mach3.
Bret