I only use mpost, but sometimes the program gets wrong.
I'm 3D rough machining, if I use helix ramping instead of plunge ramping, the machine moves without changing tool.
I talk to support and they said that only happens using MPOST.
In this moment I have a HAAS VCE 500 and a FANUC 18iMB, does anyone have a SPOST file to those machines.
PLUNGE
HELIX
I'm 3D rough machining, if I use helix ramping instead of plunge ramping, the machine moves without changing tool.
I talk to support and they said that only happens using MPOST.
In this moment I have a HAAS VCE 500 and a FANUC 18iMB, does anyone have a SPOST file to those machines.
PLUNGE
Quote:
|
% :1 (OK.NCC 27-02-2013) T1 M6 G0 G54 G90 X202.61 Y-4.279 S6000 M3 Z5. H0 M8 G0 Z0.51 G1 Z-0.74 F1000.0 X202.581 Y-4.282 Z-1.009 X202.502 Y-4.316 Z-1.266 X202.427 Y-4.43 Z-1.498 X202.475 Y-4.603 Z-1.694 X202.66 Y-4.798 Z-1.868 X202.87 Y-5.02 Z-1.968 X202.971 Y-5.072 Z-1.985 X203.084 Y-5.048 Z-1.99 G3 X203.166 Y-4.901 I-0.089 J0.147 F2000.0 G1 Y-4.579 G3 X202.866 Y-4.279 I-0.3 J0 G1 X202.614 G3 X202.475 Y-4.603 I0 J-0.192 G1 X202.87 Y-5.02 G3 X203.084 Y-5.048 I0.125 J0.118 G1 X203.144 Y-4.986 Z-1.987 F1000.0 |
HELIX
Quote:
|
% :1 (NOK.NCC 27-02-2013) G1 X112.403 Y-44.408 Z5.009 F1000.0 S6000 Z3.759 X112.494 Z3.291 X112.755 Z2.891 X113.146 Z2.617 X113.611 Z2.51 X180.873 Z0.234 X207.068 Z-0.652 X207.187 Y-44.363 Z-0.656 X207.385 Y-44.187 Z-0.665 X207.446 Y-44.053 Z-0.67 Y-5.048 Z-1.99 G3 X205.988 Y-4.8 I-0.75 J0 G1 X205.276 Y-6.829 G2 X202.915 Y-7.496 I-1.415 J0.497 X203.084 Y-5.048 I0.946 J1.164 G3 X203.166 Y-4.901 I-0.089 J0.147 G1 Y-4.579 G3 X202.866 Y-4.279 I-0.3 J0 G1 X202.614 G3 X202.475 Y-4.603 I0 J-0.192 G1 X202.87 Y-5.02 G3 X203.084 Y-5.048 I0.125 J0.118 G1 X203.144 Y-4.986 Z-1.987 X203.166 Y-4.901 Z-1.978 Y-4.579 Z-1.886 X203.117 Y-4.414 Z-1.793 X202.999 Y-4.31 Z-1.672 X202.866 Y-4.279 Z-1.528 X202.709 Z-1.28 X202.614 Z-1.002 X202.586 Y-4.281 Z-0.74 X202.586 Z0.51 X202.529 Y-4.341 Z1.18 X202.361 Y-4.517 Z1.81 X202.091 Y-4.799 Z2.361 X201.737 Y-5.168 Z2.801 X201.319 Y-5.605 Z3.102 X200.863 Y-6.081 Z3.248 X200.858 Y-6.087 Z3.249 T1 M6 G0 G54 G90 X167.878 Y-40.534 S6000 M3 Z7.748 H0 M8 G0 X167.527 Y-40.901 Z7.749 |