I am post processing my G-code using CAMWorks and I am having issues when running it in Mach 3. The tool paths look right when I first import it but the machine takes off in the wrong direction as shown by the green machining line. Do I need to add something to the G-code after post processing to make it read correctly?
I thought that I read something about changing the arcs to inc or something like that but I am not sure if that change alone will solve my problem...it didn't seem to before but maybe I did it wrong. I will post up the first few lines of code at the bottom.
Thanks for any help!
![]()
I thought that I read something about changing the arcs to inc or something like that but I am not sure if that change alone will solve my problem...it didn't seem to before but maybe I did it wrong. I will post up the first few lines of code at the bottom.
Thanks for any help!
Code:
O0001
N1 G20
N2 (1/4 2 FLUTE HSS EM)
N3 G91 G28 X0 Y0 Z0
N4 T09 M06
N5 S2000 M03
N6 G90 G54 G00 X-7.298 Y-1.4975
N7 G43 Z.1 H09 M08
N8 G01 Z-.5 F1.875
N9 G17 Y.5225 F15.
N10 X1.66
N11 Y-1.4975
N12 X-7.298
N13 X-7.2105 Y-1.41
N14 Y.435
N15 X1.5725
N16 Y-1.41
N17 X-7.2105
N18 G00 Z.1
N19 X-7.123 Y-1.1316
N20 G01 Z-.5 F1.875