Hello,
I was getting the 103 X servo error too large alarm, I found a blown servo amp so we switched the X and A amp around to keep running. Well that didn't fix the problem. So the HFO tech came in with a new amp, motor and cables. We could replicate the alarm with a new motor and cable sitting on the work table. So we thought Mocon board, I installed a new board and we still get the alarm. I double checked all connections for good pins and proper location and they were all good. After that I powered the machine back up and I get the 102 Servos Off and the 104 Y servo error to large alarms right at power up before attempting to move the axis. Any thoughts as to what we have going on here?
Thanks.
Brian
I was getting the 103 X servo error too large alarm, I found a blown servo amp so we switched the X and A amp around to keep running. Well that didn't fix the problem. So the HFO tech came in with a new amp, motor and cables. We could replicate the alarm with a new motor and cable sitting on the work table. So we thought Mocon board, I installed a new board and we still get the alarm. I double checked all connections for good pins and proper location and they were all good. After that I powered the machine back up and I get the 102 Servos Off and the 104 Y servo error to large alarms right at power up before attempting to move the axis. Any thoughts as to what we have going on here?
Thanks.
Brian