Need Help! Alarms When helical interpolating while in polar interpolation mode

Hey Ladies and Gentleman,

I am trying to interpolate holes on the face of a part, i get an alarm saying "illegal plane axis commanded" when it hits the purple line of code.
any one know why this is or how to work around it?

the machine is a hardinge talent 8/52 lathe

thanks in advance!


N3 ( Z-AXIS ROTARY TOOL )
( ROUGH1 POCKET POCKET1 )
G0 G18 G40 G80 G98
G28 U0.
M98 P1
T0404 ( EM .0625 F-ROTARY Z )
G98
M123
G97 S5000 M13
G0 Z1.02
X0.5118 C0. M8
G12.1
G1 X0.0041 C0.2559 F30.0
Z-0.045
Z-0.055 F2.0
G3 X-0.0011 C0.2585 R0.0026
X-0.0063 C0.2559 R0.0026
X0. C0.2528 Z-0.0554 R0.0031
X0.0063 C0.2559 Z-0.0558 R0.0031
X0. C0.2591 Z-0.0563 R0.0031
X-0.0063 C0.2559 Z-0.0567 R0.0031
X0. C0.2528 Z-0.0571 R0.0031
X0.0063 C0.2559 Z-0.0575 R0.0031
X0. C0.2591 Z-0.058 R0.0031
X-0.0063 C0.2559 Z-0.0584 R0.0031
X0. C0.2528 Z-0.0588 R0.0031
X0.0063 C0.2559 Z-0.0592 R0.0031
X0. C0.2591 Z-0.0597 R0.0031
X-0.0063 C0.2559 Z-0.0601 R0.0031
X0. C0.2528 Z-0.0605 R0.0031
X0.0063 C0.2559 Z-0.0609 R0.0031
X0. C0.2591 Z-0.0614 R0.0031
X-0.0063 C0.2559 Z-0.0618 R0.0031
X0. C0.2528 Z-0.0622 R0.0031
X0.0063 C0.2559 Z-0.0626 R0.0031
X0. C0.2591 Z-0.0631 R0.0031
X-0.0063 C0.2559 Z-0.0635 R0.0031
X0. C0.2528 Z-0.0639 R0.0031
X0.0063 C0.2559 Z-0.0643 R0.0031